When plant cells take up lots of water by osmosis they become rigid, like a blown up balloon. We say they are turgid. This provides a lot of support to plants. When a plant dries out the cells lose their turgidity, which is why the leaves start to wilt.
Most of the largest plants we see, such as trees, have wood in them. Wood provides a lot of support and prevents branches from breaking or from wilting if they dry out. Lignin is the substance produced in the cells of woody plants that gives them this structure.
The skeleton of a mammal is made of bone and cartilage. Bone is a lot stronger than cartilage, because it needs to provide support for the body and a firm structure for muscles to attach to so that they can move parts of the body. Cartilage is the softer substance found in your ears, in your nose and between the joints. Cartilage does not contain as much calcium as bone, so it is more flexible which is why you can bend your ears. It is also smoother, which is why it is found in joints to stop the bones from rubbing together.
You need to know the names and positions of the following parts of the arm: the ulna, radius, humerus, scapula, tendons, biceps an triceps. The two bones in the forearm are the radius and the ulna. The ulna is the one that forms the elbow. The humerus is the bone in the upper arm. The scapulas are also known as the shoulder blades and are the plates located on your upper back. The biceps and the triceps are found either side of the humerus. When the biceps contracts it pulls on the bones in the forearm and bends the arm. When the triceps contracts it pulls on the part of the ulna that sticks out to make the elbow and this straightens the arm.
The contraction of these muscles produces a turning effect, with the elbow acting as the pivot. You may remember from your physics that the ?moment? (or turning force) is the force multiplied by its perpendicular distance (distance at right angles) from the pivot. This means that there is a bigger moment if the force is not acting near the pivot. This is why door handles are not near the hinge. The design of the human arm has the muscles attached very close to the pivot. Therefore they need to produce very large forces in order to move the arm. The arm could lift much heavier weights if the muscle was attached near the hand, but of course it would get in the way. You might be asked to make some moments calculations to do with the arm.
A joint occurs wherever two bones meet. Not all joints can move (for instance the various bones in your skull are fixed in place). A synovial joint allows the movement of two bones without the bones rubbing together and causing damage. The bones have a layer of cartilage at the ends and synovial fluid in the gap between the bones helps reduce friction, a bit like oil in a motor.
Thursday, November 6, 2008
Organisms in their Environment
A population is all the individuals of a particular species that live in one area. For instance, you can have the population of fleas on a dog, or the population of fleas in El Salvador. If the conditions are perfect a population will grow. Eventually the population will get so big that there is not enough food, or not enough space, or too much disease, or too many predators, or some other factor that limits the population size, so the population stops growing.
We can draw graphs of population size against time which often have characteristic shapes. When nothing in the environment limits the growth of the population we see an exponential curve. This is where the graph gets steeper and steeper and steeper. This is what has happened to human populations throughout history. We have not yet reached our limit (though we will soon), but usually the graph stops getting steeper and flattens out, giving a characteristic sigmoid shape (sigmoid is like a flattened S shape).
In any habitat there will be many different populations that all have an effect on each other. This is called the community. The habitat will also affect the community because of such things as temperature, amount of water etc. The community and habitat together are known as the ecosystem.
An ecosystem gets all of its energy from sunlight. Plants absorb sunlight during photosynthesis and use it to produce complex chemicals such as glucose and proteins. An animal cannot make these chemicals, so to get them it needs to consume plants, or other animals that have consumed plants. When these animals and plants die the energy they contain is not wasted. Other organisms such as bacteria and worms feed on the decomposing remains of dead organisms. In this way, energy passes along a food chain from sunlight to plants (which we call producers), to animals (which we call consumers) to decomposers.
At the end of the food chain very little of the original energy from the sunlight remains for the decomposers. This is because much of the energy has been used up by the plants and animals further down the chain (of course remembering that we cannot create or destroy energy, only transfer it from one form into another ? in this case the organisms have transferred it mostly into heat energy). This is why the animals at the top of the food chain (the tertiary consumers), such as eagles, jaguars, wolves etc are generally quite rare, whereas plants and primary consumers (the animals that eat plants) are much more common.
We can represent the number or organisms in a food chain by using a pyramid of numbers. We call it a pyramid because usually there are less individuals the further up the food chain that you go. However this is not always the case. For example you can have thousands of insects living on one tree because the tree is so big. In this case it is better to use a pyramid of biomass (the dry mass of the organisms at each step in the food chain). This is because even though there are more insects than trees, there is a far greater mass of tree than there is of insects.
The pyramid of numbers can also tell us something about how humans can get more food from the land. If energy is lost on its way up the food chain then humans will get more energy out of their land if they grow crops than if they raise animals. An area of land may grow enough lettuces to feed one hundred people, but if you feed the lettuces to rabbits and then eat the rabbits you may only feed about 10 people, because typically only about 10% of the energy is passed from one level in the food chain to the next. Occasionally, it will still be important to eat some animals because they provide an important source of protein which only certain plants can provide.
We can draw graphs of population size against time which often have characteristic shapes. When nothing in the environment limits the growth of the population we see an exponential curve. This is where the graph gets steeper and steeper and steeper. This is what has happened to human populations throughout history. We have not yet reached our limit (though we will soon), but usually the graph stops getting steeper and flattens out, giving a characteristic sigmoid shape (sigmoid is like a flattened S shape).
In any habitat there will be many different populations that all have an effect on each other. This is called the community. The habitat will also affect the community because of such things as temperature, amount of water etc. The community and habitat together are known as the ecosystem.
An ecosystem gets all of its energy from sunlight. Plants absorb sunlight during photosynthesis and use it to produce complex chemicals such as glucose and proteins. An animal cannot make these chemicals, so to get them it needs to consume plants, or other animals that have consumed plants. When these animals and plants die the energy they contain is not wasted. Other organisms such as bacteria and worms feed on the decomposing remains of dead organisms. In this way, energy passes along a food chain from sunlight to plants (which we call producers), to animals (which we call consumers) to decomposers.
At the end of the food chain very little of the original energy from the sunlight remains for the decomposers. This is because much of the energy has been used up by the plants and animals further down the chain (of course remembering that we cannot create or destroy energy, only transfer it from one form into another ? in this case the organisms have transferred it mostly into heat energy). This is why the animals at the top of the food chain (the tertiary consumers), such as eagles, jaguars, wolves etc are generally quite rare, whereas plants and primary consumers (the animals that eat plants) are much more common.
We can represent the number or organisms in a food chain by using a pyramid of numbers. We call it a pyramid because usually there are less individuals the further up the food chain that you go. However this is not always the case. For example you can have thousands of insects living on one tree because the tree is so big. In this case it is better to use a pyramid of biomass (the dry mass of the organisms at each step in the food chain). This is because even though there are more insects than trees, there is a far greater mass of tree than there is of insects.
The pyramid of numbers can also tell us something about how humans can get more food from the land. If energy is lost on its way up the food chain then humans will get more energy out of their land if they grow crops than if they raise animals. An area of land may grow enough lettuces to feed one hundred people, but if you feed the lettuces to rabbits and then eat the rabbits you may only feed about 10 people, because typically only about 10% of the energy is passed from one level in the food chain to the next. Occasionally, it will still be important to eat some animals because they provide an important source of protein which only certain plants can provide.
Nervous System


The Vertebrate Nervous System:
1 - receives stimuli from receptors & transmits information to effectors that respond to stimulation
2 - regulates behavior by integrating incoming sensory information with stored information (the results of past experience) & translating that into action by way of effectors
3 - includes billions of nerve cells (or neurons), each of which establishes thousands of contacts with other nerve cells
4 - also includes neuroglia cells that support, nourish, & insulate neurons
1 - receives stimuli from receptors & transmits information to effectors that respond to stimulation
2 - regulates behavior by integrating incoming sensory information with stored information (the results of past experience) & translating that into action by way of effectors
3 - includes billions of nerve cells (or neurons), each of which establishes thousands of contacts with other nerve cells
4 - also includes neuroglia cells that support, nourish, & insulate neurons
Subdivisions of the Vertebrate Nervous System:
1 - Central Nervous System - including the brain & spinal cord
2 - Peripheral Nervous System - including cranial nerves, spinal nerves, & all branches of cranial & spinal nerves
1 - Central Nervous System - including the brain & spinal cord
2 - Peripheral Nervous System - including cranial nerves, spinal nerves, & all branches of cranial & spinal nerves
Neurons (or nerve cells):
respond to stimuli & conduct impulses
3 types - all with cell body & processes (axons & dendrites):
multipolar
bipolar
unipolar
respond to stimuli & conduct impulses
3 types - all with cell body & processes (axons & dendrites):
multipolar
bipolar
unipolar
Spinal cord:
located in vertebral canal
anatomical beginning is the foramen magnum of the skull
length varies among vertebrates:
in vertebrates with abundant tail musculature, the spinal cord extends to the caudal end of the vertebral column
in vertebrates without tails or without much tail musculature, the spinal cord extends to about the lumbar region of the vertebral column
a cross-section of the spinal cord reveals gray matter & white matter. The gray matter consists of nerve cell bodies, while the white matter consists of nerve cell processes (axons). These processes make up ascending (sensory) and descending (motor) fiber tracts.
located in vertebral canal
anatomical beginning is the foramen magnum of the skull
length varies among vertebrates:
in vertebrates with abundant tail musculature, the spinal cord extends to the caudal end of the vertebral column
in vertebrates without tails or without much tail musculature, the spinal cord extends to about the lumbar region of the vertebral column
a cross-section of the spinal cord reveals gray matter & white matter. The gray matter consists of nerve cell bodies, while the white matter consists of nerve cell processes (axons). These processes make up ascending (sensory) and descending (motor) fiber tracts.
Neuronal Structure
Sensory Neurone
The nerve impulses travel from left to right in this diagram of a sensory neurone. A stimulus causes the impulse to be produced by a sense organ. (skin / ears / eyes / tongue / nose)
Dendrites and Synapses are both nerve endings at the ends of neurones. Dendrites are located at the ends that receive the nerve impulses (at the left of diagram above). Synapses are found at the transmitting ends of the neurone where the impulse is transferred to another neurone. Synapses use chemicals to transmit their electrical signal.
Relay Neurone
This neurone does exactly what its name suggests. Relay neurones are situated in the spinal cord. This, along with the brain, acts as the central nervous system.
Reflex actions are caused when a stimulus creates an electrical impulse that is relayed via the relay neurone straight to the effector. The message never actually reaches the brain.
Motor Neurone
A motor neurone is connected to an effector and when an electrical nerve impulse is transmitted, the effector is stimulated into action. (muscles / glands)
The nerve impulses travel from left to right in this diagram of a sensory neurone. A stimulus causes the impulse to be produced by a sense organ. (skin / ears / eyes / tongue / nose)
Dendrites and Synapses are both nerve endings at the ends of neurones. Dendrites are located at the ends that receive the nerve impulses (at the left of diagram above). Synapses are found at the transmitting ends of the neurone where the impulse is transferred to another neurone. Synapses use chemicals to transmit their electrical signal.
Relay Neurone
This neurone does exactly what its name suggests. Relay neurones are situated in the spinal cord. This, along with the brain, acts as the central nervous system.
Reflex actions are caused when a stimulus creates an electrical impulse that is relayed via the relay neurone straight to the effector. The message never actually reaches the brain.
Motor Neurone
A motor neurone is connected to an effector and when an electrical nerve impulse is transmitted, the effector is stimulated into action. (muscles / glands)
Skin and homeostasis
When the body is cold
1. The small capillaries near the surface of the skin constrict (vasoconstriction) so less blood flows nearer to the surface, and less heat is lost through he blood.
2. The hairs on the skin stand erect by the hair erector muscles tightening. The hairs trap a layer of insulating air therefore less heat is lost to the surroundings.
3. Sweat Glands produce less sweat so less heat is lost through evaporation.
The muscles also vibrate very quickly when it is cold, so heat is produced to keep the body temperature at the correct level. This is also known as shivering!
When the body is hot
1. The small capillaries near the surface of the skin dilate (vasodilation) so more blood flows nearer to the surface, and more heat is lost through he blood. The body therefore cools down.
2. The hairs on the skin lie flat because the hair erector muscles slacken. No layer of insulating air is trapped therefore heat can be lost more easily.
3. Sweat Glands produce more sweat so more heat can be lost through evaporation
1. The small capillaries near the surface of the skin constrict (vasoconstriction) so less blood flows nearer to the surface, and less heat is lost through he blood.
2. The hairs on the skin stand erect by the hair erector muscles tightening. The hairs trap a layer of insulating air therefore less heat is lost to the surroundings.
3. Sweat Glands produce less sweat so less heat is lost through evaporation.
The muscles also vibrate very quickly when it is cold, so heat is produced to keep the body temperature at the correct level. This is also known as shivering!
When the body is hot
1. The small capillaries near the surface of the skin dilate (vasodilation) so more blood flows nearer to the surface, and more heat is lost through he blood. The body therefore cools down.
2. The hairs on the skin lie flat because the hair erector muscles slacken. No layer of insulating air is trapped therefore heat can be lost more easily.
3. Sweat Glands produce more sweat so more heat can be lost through evaporation
cells and function- plant cell

Plant cell: the cell is a highly complex system that is the site of intense energy exchange and which presents vast interphase surfaces. Like all living organisms, it feeds itself, grows, multiplies and dies.
Plasmodesma: intercellular bridge.
Dictyosome: cellular organelle that elaborates sugars and proteins.
Chromatin: a colouring substance in the nucleus of the cell.Nucleus: small spherical body with the cell nucleus.
Nuclear envelope: membrane surrounding the nucleolus.Endoplasmic reticulum: a formation within the cytoplasm that plays a role in the production of various substances.Peroxisome: cytoplasmic organelle which contains enzymes.Chloroplast: granule of chlorophyll, which is needed for photosynthesis.
Mitochondria: granule that plays an important role in the respiration and energy-releasing reactions in living cells.
Cytosol: liquid part of the cytoplasm.
Free ribosome: cytoplasmic organelle which is responsible for protein synthesis.
Tonoplast: vacuolar membrane.Vacuole: space with the cytoplasm of a cell containing various substances.
Cell wall: cell wall.
Plasma membrane: envelope of plasma.
Thylakoids: membranous molecular structures involved in photosynthesis.
Starch grain: starch granule.
Monday, October 27, 2008
Cell Respiration
2.7.1. Define cell respiration.
Cell respiration is the controlled release of energy in the form of ATP from organic compounds in cells.
2.7.2. State that in cell respiration, glucose in the cytoplasm is broken down into pyruvate with a small yield of ATP.
In cell respiration, glucose in the cytoplasm is broken down into pyruvate with a small yield of ATP.
2.7.3. Explain that in anaerobic cell respiration, pyruvate is converted into lactate or ethanol and carbon dioxide in the cytoplasm, with no further yield of ATP.
In anaerobic cell respiration, pyruvate is converted into either lactate by lactic acid fermentation or ethanol and carbon dioxide during alcohol fermentation. This produces no further yield of ATP. The ethanol and carbon dioxide are produced in yeast whereas lactate is produced in humans.
2.7.4. Explain that in aerobic cell respiration, pyruvate is broken down in the mitochondrion into carbon dioxide and water with a large yield of ATP.
In aerobic respiration, each pyruvate enters the Krebs cycle, a series of chemical reactions within the mitochondria. Just before this cycle, the pyruvate is decarboxylated, which produces the carbon dioxide, and the remaining two-carbon molecule reacts with a reduced Coenzyme A, and at the same time one NADH+H+ is formed. The pyruvate then enters the cycle, with the end result being the production of 3 NADH, 3 H+, 3 carbon dioxide molecules,and one ATP. The NADH and H+ molecules will be used in the electron transport chain (ETC), where the H+ will react with oxygen to produce water. The result of the ETC is a large yield of ATP.
Cell respiration is the controlled release of energy in the form of ATP from organic compounds in cells.
2.7.2. State that in cell respiration, glucose in the cytoplasm is broken down into pyruvate with a small yield of ATP.
In cell respiration, glucose in the cytoplasm is broken down into pyruvate with a small yield of ATP.
2.7.3. Explain that in anaerobic cell respiration, pyruvate is converted into lactate or ethanol and carbon dioxide in the cytoplasm, with no further yield of ATP.
In anaerobic cell respiration, pyruvate is converted into either lactate by lactic acid fermentation or ethanol and carbon dioxide during alcohol fermentation. This produces no further yield of ATP. The ethanol and carbon dioxide are produced in yeast whereas lactate is produced in humans.
2.7.4. Explain that in aerobic cell respiration, pyruvate is broken down in the mitochondrion into carbon dioxide and water with a large yield of ATP.
In aerobic respiration, each pyruvate enters the Krebs cycle, a series of chemical reactions within the mitochondria. Just before this cycle, the pyruvate is decarboxylated, which produces the carbon dioxide, and the remaining two-carbon molecule reacts with a reduced Coenzyme A, and at the same time one NADH+H+ is formed. The pyruvate then enters the cycle, with the end result being the production of 3 NADH, 3 H+, 3 carbon dioxide molecules,and one ATP. The NADH and H+ molecules will be used in the electron transport chain (ETC), where the H+ will react with oxygen to produce water. The result of the ETC is a large yield of ATP.
Transcription and Translation
2.6.1. Compare the structure of RNA and DNA.
RNA has the ribose sugar while the DNA has the deoxyribose sugar in its structure. RNA is only one single strand while DNA has a double helix with two strands. Also, the thymine nucleotide of DNA is replaced by uracil in RNA (uracil, like thymine, attaches to adenine by hydrogen bonds).
2.6.2. Outline the DNA transcription in terms of the formation of an RNA strand complementary to the DNA strand by RNA polymerase.
The synthesis of RNA uses DNA as a template. First, the two strands of DNA are separated in a specific place. Then, with the help of RNA polymerase, RNA nucleotides attach to thier complimentary bases on one side of the exposed DNA strand. This creates a single strand of complimentary nucleotide bases. After this is done, the RNA molecule separates from the DNA.
2.6.3. Describe the genetic code in terms of codons composed of triplets of bases.
The genetic code for an amino acid is contained in DNA as a series of three nitrogenous bases. Each of these triplets (codons) code for a particular amino acid.
2.6.4. Explain the process of translation, leading to peptide linkage formation.
After transcriptions, the mRNA moves out of the nucleus into the cytoplasm where the mRNA attaches ro a ribosome. In the cytoplasm there are transfer RNA (tRNA) molecules. These molecules are composed of a short RNA molecule folded into a specific shape. Each tRNA molecule is shaped so that it bonds to a certain amino acid. Each tRNA moelcule also has an anticodon which compliments a certain mRNA codon. Once the mRNA attaches to a ribosome, it acts as a sort of conveyor belt. The tRNA molecules attach to the mRNA according to the complimentary nature of their bases. For example, a tRNA molecule with the anitcodon ACC will carry the amino acid tryptophan. This tRNA molecule will attach to the codon UGG on the mRNA because UGG compliments ACC. After two tRNA molecules are attached to the mRNA, they bond and the first tRNA molecule is released. Then another tRNA molecule connects to the mRNA etc, and the polypeptide is created.
2.6.5. Define the terms degenerate and universal as they relate to the genetic code.
Degenerate means that multiple triplets code for the same amino acid. For example, UUU and UUC both code for phenylalanine. Univeral refers to the fact that this genetic code occurs in all living organisms.
2.6.6. Explain the relationship between one gene and one polypeptide.
One gene corresponds to one polypeptide. It does not, however, always code for a protein, because many proteins consists of more than one polypetide
RNA has the ribose sugar while the DNA has the deoxyribose sugar in its structure. RNA is only one single strand while DNA has a double helix with two strands. Also, the thymine nucleotide of DNA is replaced by uracil in RNA (uracil, like thymine, attaches to adenine by hydrogen bonds).
2.6.2. Outline the DNA transcription in terms of the formation of an RNA strand complementary to the DNA strand by RNA polymerase.
The synthesis of RNA uses DNA as a template. First, the two strands of DNA are separated in a specific place. Then, with the help of RNA polymerase, RNA nucleotides attach to thier complimentary bases on one side of the exposed DNA strand. This creates a single strand of complimentary nucleotide bases. After this is done, the RNA molecule separates from the DNA.
2.6.3. Describe the genetic code in terms of codons composed of triplets of bases.
The genetic code for an amino acid is contained in DNA as a series of three nitrogenous bases. Each of these triplets (codons) code for a particular amino acid.
2.6.4. Explain the process of translation, leading to peptide linkage formation.
After transcriptions, the mRNA moves out of the nucleus into the cytoplasm where the mRNA attaches ro a ribosome. In the cytoplasm there are transfer RNA (tRNA) molecules. These molecules are composed of a short RNA molecule folded into a specific shape. Each tRNA molecule is shaped so that it bonds to a certain amino acid. Each tRNA moelcule also has an anticodon which compliments a certain mRNA codon. Once the mRNA attaches to a ribosome, it acts as a sort of conveyor belt. The tRNA molecules attach to the mRNA according to the complimentary nature of their bases. For example, a tRNA molecule with the anitcodon ACC will carry the amino acid tryptophan. This tRNA molecule will attach to the codon UGG on the mRNA because UGG compliments ACC. After two tRNA molecules are attached to the mRNA, they bond and the first tRNA molecule is released. Then another tRNA molecule connects to the mRNA etc, and the polypeptide is created.
2.6.5. Define the terms degenerate and universal as they relate to the genetic code.
Degenerate means that multiple triplets code for the same amino acid. For example, UUU and UUC both code for phenylalanine. Univeral refers to the fact that this genetic code occurs in all living organisms.
2.6.6. Explain the relationship between one gene and one polypeptide.
One gene corresponds to one polypeptide. It does not, however, always code for a protein, because many proteins consists of more than one polypetide
DNA Replication
2.5.1. State that DNA replication is semi-conservative.
DNA is semi-conservative.
2.5.2. Explain DNA replication in terms of unwinding of the double helix and separation of the strands by helicase, followed by formation of the new complementary strands by DNA polymerase.
When replication takes place, the enzyme helicase first unwinds the double helix . Next the two DNA strands are split apart at hundreds, sometimes thousands, of points along the strand. Each splitting point is an area where replication is occuring, called a replication bubble. In each replication bubble, new DNA is made by attaching free nucleotides to the original strand (called the template) by base-pairing rules with the help of the enzyme DNA polymerase. The process results in two identical DNA strands produced from one.
2.5.3. Explain the significance of complementary base pairing in the conservation of the base sequence of DNA.
Because the nitrogenous bases that compose DNA can only pair with complementary bases, any two linked strands of DNA are necessarily complementary to one another. The fact that only complementary base pairs can join together means that in replication the newly formed strands must be complementary to the old strands, thus conserving the same base sequence as previously existed.
DNA is semi-conservative.
2.5.2. Explain DNA replication in terms of unwinding of the double helix and separation of the strands by helicase, followed by formation of the new complementary strands by DNA polymerase.
When replication takes place, the enzyme helicase first unwinds the double helix . Next the two DNA strands are split apart at hundreds, sometimes thousands, of points along the strand. Each splitting point is an area where replication is occuring, called a replication bubble. In each replication bubble, new DNA is made by attaching free nucleotides to the original strand (called the template) by base-pairing rules with the help of the enzyme DNA polymerase. The process results in two identical DNA strands produced from one.
2.5.3. Explain the significance of complementary base pairing in the conservation of the base sequence of DNA.
Because the nitrogenous bases that compose DNA can only pair with complementary bases, any two linked strands of DNA are necessarily complementary to one another. The fact that only complementary base pairs can join together means that in replication the newly formed strands must be complementary to the old strands, thus conserving the same base sequence as previously existed.
DNA Structure

Outline DNA nucleotide structure in terms of sugar (deoxyribose), base and phosphate.
A DNA nucleotide is composed of deoxyribose, a phosphate group and a nitrogenous base (adenine, guanine, thymine, or cytosine). The phosphate group is covalently bonded to the carbon of the deoxyribose, and the nitrogenous base is attached to the deoxyribose on the opposite side.
A DNA nucleotide is composed of deoxyribose, a phosphate group and a nitrogenous base (adenine, guanine, thymine, or cytosine). The phosphate group is covalently bonded to the carbon of the deoxyribose, and the nitrogenous base is attached to the deoxyribose on the opposite side.
2.4.2. State the names of the four bases of DNA.
Adenine, Guanine, Thymine, and Cytosine.
Adenine, Guanine, Thymine, and Cytosine.
2.4.3. Outline how the DNA nucleotides are linked together by covalent bonds into a single strand.
given
given
2.4.4. Explain how a DNA double helix is formed using complimentary base pairing and hydrogen bonds.
Each sugar of the backbone (sides of the "ladder") is covalently bonded to a nitrogenous base. Each of these bases forms hydrogen bonds with its complimentary nitrogenous base, forming the '"rungs" of the "ladder". The sides of the ladder are composed of alternating sugar and phosphate groups. The rungs are each composed of two nucleotides which are attached to the sugars of opposite sides of the DNA ladder and are attatched to eachother by hydrogen bonds.
Each sugar of the backbone (sides of the "ladder") is covalently bonded to a nitrogenous base. Each of these bases forms hydrogen bonds with its complimentary nitrogenous base, forming the '"rungs" of the "ladder". The sides of the ladder are composed of alternating sugar and phosphate groups. The rungs are each composed of two nucleotides which are attached to the sugars of opposite sides of the DNA ladder and are attatched to eachother by hydrogen bonds.
2.4.5. Draw a simple diagram of the molecular structure of D
Enzymes

2.3.1 Define enzyme and active site.
An enzyme is a globular protein functioning as a biological catalyst. An active site is the site on the surface of an enzyme to which substrate or substrates bind.
An enzyme is a globular protein functioning as a biological catalyst. An active site is the site on the surface of an enzyme to which substrate or substrates bind.
2.3.2 Explain enzyme-substrate specificity.
An enzyme has an active site that fits with one specific substrate, like a lock and key.
An enzyme has an active site that fits with one specific substrate, like a lock and key.
2.3.3 Explain the effects of temperature, pH and substrate concentration on enzyme activity.
For all enzymes, there is an optimum temperature at which the maximum amount of collisions occur in the active sites. As the temperature decreases, there is less movement and fewer collisions, so enzyme activity decreases. There is a limit to which the enzyme activity can increase because at a certain temperature the enzymes denature. This means that the enzyme changes shape and no longer fits with its substrate. Also, as the substrate concentration increases, so does the enzyme activity, but there is also a limit to the increase in enzyme activity because there is a limit to how quickly the enzymes can catalyze each reaction. There is a specific pH at which the enzyme will denature, and so pH also plays a part in enzymatic activity.
For all enzymes, there is an optimum temperature at which the maximum amount of collisions occur in the active sites. As the temperature decreases, there is less movement and fewer collisions, so enzyme activity decreases. There is a limit to which the enzyme activity can increase because at a certain temperature the enzymes denature. This means that the enzyme changes shape and no longer fits with its substrate. Also, as the substrate concentration increases, so does the enzyme activity, but there is also a limit to the increase in enzyme activity because there is a limit to how quickly the enzymes can catalyze each reaction. There is a specific pH at which the enzyme will denature, and so pH also plays a part in enzymatic activity.
2.3.4 Define denaturation.
Denaturation is a structural change in a protein that results in a loss of its biological properties.
Denaturation is a structural change in a protein that results in a loss of its biological properties.
2.3.5 Explain the use of pectinase in fruit juice production, and one other commercial applicatoin of enzymes in biotechnology.
Pectinase is used in fruit juice production to break down the acidity of the juices. Also, during oil spills, oil-digesting bacteria are used to clean up the spills since these bacteria have enzymes that can break down oil.
Pectinase is used in fruit juice production to break down the acidity of the juices. Also, during oil spills, oil-digesting bacteria are used to clean up the spills since these bacteria have enzymes that can break down oil.
Carbohydrates, Lipids and Proteins




Define organic.
Compounds containing carbon that are found in living organisms, except hydrogencarbonates, carbonates and oxides, are organic.2.2.2 Draw the basic structure of a generalized amino acid.
2.2.3 Draw the ring structure of glucose and ribose.
2.2.3 Draw the ring structure of glucose and ribose.
Ribose - given
Glucose - given
Glucose - given
2.2.4 Draw the structure of glycerol and a generalized fatty acid.
2.2.5 Outline the role of condensation and hydrolysis in the relationships between monosaccharides, disaccharides, and polysaccharides; fatty acids, glycerol and glycerides; amino acids, dipeptides and polypeptides.
For monosaccharides, fatty acids, and amino acids to become disaccharides, glycerol, and didpeptides, a condensation reaction needs to occur. When these monomers covalently bond, a water molecule is released; this is a condesation reaction. When many monomers join together through condensation reactions, polymers result. In a hydrolysis reaction, the addition of a water molecule breaks down the covalent bonds and polymers break down into monomers.
2.2.6 Draw the structure of a generalized dipeptide, showing the peptide linkage.
Drawing will be inserted at a later date.
Drawing will be inserted at a later date.
2.2.7 List two examples for each of monosaccharides, disaccharides and polysaccharides.
Two examples of monosaccharides are glucose and fructose. Two examples of disaccharides are maltose and lactose. Two examples of polysaccharides are starch and cellulose.
Two examples of monosaccharides are glucose and fructose. Two examples of disaccharides are maltose and lactose. Two examples of polysaccharides are starch and cellulose.
2.2.8 State one function of a monosaccharide and one function of a polysaccharide.
One function of a monosaccharide is that they are major nutrients for the cell. One function of a polysaccharide is that provide structural support for the cell.
One function of a monosaccharide is that they are major nutrients for the cell. One function of a polysaccharide is that provide structural support for the cell.
2.2.9 State three functions of lipids.
One function of lipids is that they are great insulators. Also, some lipids function as hormones. In addition, lipids are used for long term energy storage.
2.2.10 Discuss the use of carbohydrates and lipids in energy storage.
The use of carbohydrates in energy storage is through its sugar polymers, glycogen in animals and starch in plants. These sugars are released when the demand for sugar increases. Animals use lipids, mainly fats, for long-term energy storage.
The use of carbohydrates in energy storage is through its sugar polymers, glycogen in animals and starch in plants. These sugars are released when the demand for sugar increases. Animals use lipids, mainly fats, for long-term energy storage.
Subscribe to:
Posts (Atom)
